Skip to content
We Ship World Wide!
Shop Our Categories
Solar Hydronic Heaters
Solar Water Heating Collectors
Off Grid Solar Water Systems
Solar Hot Water Tanks
Solar Expansion Tanks
Solar Controllers & Pumps
Solar Pump Stations
Solar Water Heating Controllers
Solar Misc Parts
Solar Piping & Fittings
Solar energy monitoring
Solar Heat Exchangers
Solar Package Kits
Solar Water Heating Kits
Solar Pool Heating Kits
Commercial Solar Heating Kits
Solar PV Kits - ON Grid
Solar PV Panels
MIsc Solar PV Parts
Closed Loop versus Drain Back
Solar Water Tank Info
Evacuated Tubes vs Flat Plate Collectors
FAQ - Knowledge base
Solar Space Heating
Solar Piping & Fittings
1 Inch Flexible Twin Solar Pipe, 2 x 50ft Roll
Fast and professional solution
Fast & Flexible
List Price: CAN$1,100.00 Exc GST/HST
673.00 Exc GST/HST
Designed for quick installation of solar hot water system. This flexible steel pipe speeds up the solar installation and provides a much more economical way of running the pipes to and from your roof to the mechanical room and provide a
leak free installation.
Approx Weight: 12Kgs
Closed Cell Elastomerer, EPDM
Temperature Range: -50DegC to +150 DegC
Water Vapour Permeability: >3000
Thermal Conductivity: W/(m.K)
0 DegC: 0.034 (R Value Approx
24 DegC = 0.037
32 DegC = 0.038
40 DegC = 0.039
UV Resistant Material
Tough external Coating to protect from Birds.
Temperature Sensor Wire
Operating range: -1000DegC to +200 DegC
Copper Wire: 0.75mm2
Voltage: 300/500 V
Electrical Resistance: 23 Ohm/km
Stainless Steel Pipe
This is a 304 Steel, this is the sort of steel that is used in Cooking pans, sinks, fridges, tabletops etc. This type of steel is one of the most frequently used types of steel. It is used widely in food processing equipment, in particular in the brewing industry for beer and wine. In short it is used a lot and is good for fluid applications.
There are other types of flexible steel pipe available that use 316 Steel. 316 Steel has a higher strength and wear resistance and is typically used in Marine environments.
We can also supply a 316 grade flexible steel pipe however it is a higher costs and is not necessary for the solar applications.
Time and Cost Savings
This flexible steel pipe is 50ft long and comes in two roles per cartono.
It is a twin hose for your supply and return line.
It has the sensor cable built in.
To run a normal copper line will take the following steps
Buy 2 x 50ft rolls of copper (approx cost $110 each) = $220
Buy 50ft Cable = Approx $25
Buy 100 ft (50ft supply and 50ft Return of EPDM Insulation) = Approc $5.5 Per foot = $550
Total so Far = $795
begin the install..... count the hours to do all this.
Run one roll of copper don't forget it is stiff and takes a good effort to run it where you want!
Run the second roll of copper.
Attach the EPDM Insulation (it is in 6ft lengths) to each pipe and secure with tie wraps.
Stop to bandage all you knuckles up after you scrape your skin trying to wrap the insulation and tie wrap it under the floor or behind drywall.
Run the wire / temperature sensor and secure it to the insulation.
Remember all this pipe and insulation is likely behind dry wall, under floor boards etc - very time consuming!
Cover the outside of the Insulation with UV resistant coating to stop the sun ruining the insulation or the birds pecking at it!
Buy 50ft of our Flexible Solar Pipe
Unwrap the pipe and run it from the mechanical room to the roof.
Flexible Stainless Steel Tubing
UV Resistant protective coating
Built in sensor wire.
3/4" Thick EPDM Insulation
High R Value
Click the extended features tab to see how much time and effort you can save with this flexible pipe.
You may also like...
30 Tube Solar Collector
CAN$1,453.00 Exc GST/HST